Skip Ribbon Commands
Skip to main content
Sign In
MPE > Bulk Packaging
Bulk Packaging

Bulk Shipment to Mopar Facilities
  • Develop bulk packaging with partitions and layer pads to protect and stabilize the part in transportation to the packaging facility.
  • Mixed loads should be packaged by part number and clearly identified on the pallet. Each part number must be in its own masterpack container to ease the sorting process at the packaging facility.
  • Two AIAG labels, per part number, are required on adjacent sidesof the load.
  • Parts such as screws, nuts, bolts, clips, etc. should be masterpackaged in standard quantities.
  • Recommended masterpacks include the following approved Mopar containers:
KC103505 - 21.125"x 9.875"x 9.125" (ID) 200# C-Flute
KC033550 - 10.375"x 9.875"x 9.125" (ID) 200# C-Flute
KC104544 - 10.375"x 9.875"x 4.313" (ID) 200# C-Flute
  • Characteristics such as size, weight, and volume should be taken into consideration when selecting a masterpack container. As a general rule masterpacks are not to exceed 35lbs.
  • Large parts must be individually identified with the part number via a L-Series label or wire tag. For more information please reference I-08.
  • Expendable packaging must be used. Returnable containers will not be accepted and return is not guaranteed.
  • When parts permit, the load configuration must be in compliance with the P.O. Clause "90".


        All master and bulk packs must be properly labeled (including the FCA part number) to reflect the contents of the container.  View labeling section for more details.
 Please reference the Labeling section for further information on load identification.
Attn: Suppliers shipping to the following locations: 03118, 24874, 40988, 60989, and 90990
If shipping to any of the above locations, please look closely at incoming releases, as the ship to locations will be changing throughout first quarter 2018.
Make sure you are checking your routing in eLeen.  If you have a new ship to location that is not in eLeen please reach out to the Mopar Helpline at:  or call 1-888-303-0033.
The STL addresses are as follows:
03118 – Center Line Packaging – 25999 Lawrence Ave., Center Line, MI 48015
24874 – Venchurs Packaging – 790 Liberty St, Plant2, Adrian, MI 49221
40988 – Kenosha Achievement Center – 1218 79th St., Kenosha, WI 53143
60989 – Ryan & Son’s Packaging – 315 Matzinger Rd. Unit F, Toledo, OH 43612
90990 – Ternes Howard Packaging – 700 Manufacturers Dr., Westland, MI 48186
Any questions please contact the packaging helpline at